Biamp VOIP-1-4 - Manual (Page 6)

6
VOCIA VOICE OVER IP INTERFACE (VOIP-1) FRONT PANEL
Activity (Chassis Indicator)
The VOIP-1 has an Activity LED that will illuminate to show the configuration status of the unit.
• Off – The unit is not configured.
• Solid green – The unit is configured
Status (Chassis Indicator)
The VOIP-1 has a tri-color Status LED that indicates the health of the hardware.
• Solid green – Unit is powered-up and working normally.
• Flashing amber – Will be shown briefly during the power-up self-test and will turn steady green upon a successful start.
• Solid red – The unit experienced a problem during the power-on self-test.
Status
• Flashing green – When trying to complete SIP registration.
• Solid green – When SIP registration is complete and the VoIP line is available.
In Use
• Off – No incoming call activity.
• Solid green – Incoming call or connected call.
Note: The third and fourth ‘Status’ LEDs and ‘In Use’ LEDs will remain extinguished at all times on the VOIP-1-2 model.