Decolav 1745 - Manual (Page 2)

Please contact 1-866-332-6528 for further assistance
DecolaV.com
© Deco laV, inc. 2014
2
assembly instructions
• raise Wall mounted mirror above Wall cleat and lower mirror cleat into
position. see figure 3
• Gently push down on the top of the Wall mounted mirror to ensure the
cabinet cleat and wall cleat are fully seated into position. the Wall mounted
mirror should be fully against the wall when cleats are fully seated
• slight side to side adjustments can be made by lifting up slightly on the
cabinet or sliding the cabinet left and right
mount mirror to finished wall 3
• read the warning label carefully at the back of the mirror
• Do not use electric Drill to install shelVes
• Do not overtighten
assembled the shelves to the mirror 2
• carefully remove your new mirror from carton and place safely aside
• Determine at what height the wall cleat will be hung. mark with pencil
• using a level, make a horizontal line where the mirror is to be hung which is
parallel to the floor
• Place the Wall cleat on this line in the desired location and mark for the drywall
anchor holes (note: if a hole will hit a wall stud use a screw instead of a drywall
anchor)
• Drill holes for the drywall anchors and install drywall anchors. see figure 1
setting uP your new wall mounted mirror 1
Finished Wall
Wall Hole
Wall cleat
Wall screw
Anchor
Wall cleat
Connecting bolt
Lock washer
PVC washer
Mirror
Top shelf
Bottom shelf
PVC washer
Bottom washer
Lock washer
Connecting bolt
avalyn wall mounted mirror
item #1745-ccB / 1745-eBY
note: two individuals are recommended for installation of this
product.
figure 1
figure 2
Finished Wall
Mirror
wall cleat
figure 3