DiGiCo EX-007 - Manual (Page 5)

Page 5
EX-007 User Manual
1) Load the required session on the SD-7 Engine A
2) Press the Select button in the Network panel for SD-7 Engine B
3) Press the Send Session To Selected button to transfer the session to SD-7 Engine B and wait for the process to complete
4) Press the Select button in the Network panel for EX-007 in the Remotes section of the Network panel
5) Press the Send Session To Selected button to transfer the session to the EX-007 and wait for the process to complete
6) Press the Select button in the Network panel for SD-7 Engine B
7) Press the Mirror To Selected button to mirror to SD-7 Engine B
8) Press the Select button in the Network panel for EX-007 in the Remotes section of the Network panel
9) Press the Mirror To Selected button to mirror to the EX-007
The Network panel should now look like this:
To Unmirror any device, press the Select button for the required device and then press the Unmirror Selected button.
If no devices are selected then the Unmirror Selected button can be used to Unmirror the device that you are using (Unmirror Self)
NOTE: On the EX-007, because it does not have its own Audio Engine, the Audio Mastership buttons act as Mirrored controls
for the SD-7's own Engine A & B Audio Mastership buttons.