Dow WEATHERMATE™ SILL PAN User Manual

Weathermate™ flashings and weathermate™ sill pan, Installation recommendations for, Install rigid foam insulation

Advertising
background image

US/CANADA . INSTALLATION INFORMATION . RESIDENTIAL

installation recommendations for

WEATHERMATE™ FLASHINGS AND

WEATHERMATE™ SILL PAN

®™Trademark of The Dow Chemical Company (“Dow”) or an affi liated company of Dow
*Consult the label and Material Safety Data Sheet carefully before use.
**Dow polyisocyanurate insulation available in U.S. only.

These instructions describe

how to use WEATHERMATE

™

Flashings and WEATHERMATE

™

Sill Pan to fl ash a fl anged

window installed on a wall

assembly consisting of rigid

foam as the water-resistive

barrier (WRB) on a wood frame

wall. For information on fl ashing

windows installed in other types

of wall assemblies, contact your

Dow representative or call
1-866-583-BLUE (2583).

For excellent protection against air

infi ltration and moisture penetration,

count on WEATHERMATE

™

Weather

Barrier Solutions from Dow:

• WEATHERMATE

™

housewraps

• WEATHERMATE

™

Construction Tape

• WEATHERMATE

™

Sill Pan

• WEATHERMATE

™

Straight

and/or Flexible Flashing

• GREAT STUFF PRO

™

Window &

Door Insulating Foam Sealant*

• STYROFOAM

™

Brand Extruded

Polystyrene Foam Insulation and

Dow polyisocyanurate insulation**

1. Install Rigid Foam

Insulation

a. Install approved water-resistive

STYROFOAM

™

Brand Extruded

Polystyrene Foam Insulation or

Dow polyisocyanurate insulation.

Visit www.insulateyourhome.com

for complete installation instructions

on how to install rigid foam as a

WRB.

2. Install

WEATHERMATE™

Sill Pan

a. Position one corner piece along

the base of window rough

opening, lapping over insulation.

b. Press fi rmly against corner of

window opening. Nail or staple

in place, following embossed

instructions on product.

c. Position second piece, overlapping

fi rst piece with a minimum overlap

of 2" (51 mm). Press second

piece fi rmly into corner of window

opening. Nail or staple in place,

following embossed instructions

on product.

Figure 1

RIGID FOAM INSULATION AS WATER-RESISTIVE BARRIER ON A WOOD FRAME WALL

NOTE: WEATHERMATE™

Sill Pan is suitable for use in

windowsills only.

Figure 2a

Figure 2b

Figure 2c

Advertising
This manual is related to the following products: