Fagor SFE-820CELX - Manual (Page 15)

29
EN
28
1 -
EN
3 - PROGRAMMING 1 - 3 - PROGRAMMING (continued)
D ELAYING A PROGRAM ’ S START (Fig. 3.2.2)
— Select your program using the Programs dial . A A
T IMER OPTION
This function allows you to complete the drying of a
few insufficiently dry items (as can happen with
mixed loads) or to quickly dry small loads.
— Select the appropriate program for your laundry,
using the Programs dials
. A A
— Press the “Delayed Start” button to delay
the start of your program from hour to hour until you
reach the desired delay time (max 24 hours).
— Confirm by pressing the “Start/Pause” button
. G G
E E
S TOPPING THE APPLIANCE
At the end of the program, the "STOP" light flash
and the display shows "0:00" (Fig. 3.2.8).
The “Filter”
and “Tank Full” lights flash to
remind you that you must clean the filter and empty
the water collection tank after every drying cycle:
— Turn the Time selector
to the “Off” position
.
— Empty your dryer.
— Clean the filter and empty the condensate contai-
ner (see the “REGULAR MAINTENANCE” section).
C OOLING CYCLE
All programs finish with a cooling cycle that lasts for
a few minutes to allow the washing to cool gradually.
Do not stop your dryer before this cycle has
finished.
N OTE :
— The “Anti-creasing” and "Buzzer" options remains
selected from one program to the next. You can simply
press the button to deactivate thes options, even
during a program.
A A — Press the “Timer” key repeatedly, until
you reach the desired drying time. The time is
added in 10-minute increments
(Fig. 3.2.6).
The drying temperature is adjusted according to
the laundry type of the program selected.
— Start the dryer by pressing the “Start/Pause” but-
ton
.
T ANK F ULL WARNING DURING CYCLE
If your tank is full during the drying cycle, the
appliance stops.
The “Tank Full” light
and the time remaining
flashes (Fig. 3.2.7).
— Proceed to empty your condensate container
(see the “REGULAR MAINTENANCE” section).
— Press the “Start/Pause” button
to restart
your program.
C LEAN CONDENSER WARNING
The “Condenser warning” light will flash
fromtime to time to remind you that you should
clean the condenser.
Do not forget to do this as soon as possible,
since the warning will disappear when the
next program starts.
G G
G G
D D
S TARTING THE APPLIANCE
— Check that the power cable is plugged in, and if
the door is properly closed.
— Select your program (see the table “Your dryer’s
programs” on the following pages) by turning the
Programs dial
(it turns in both directions). A A
— Press “Start/Pause” . The program will
start.
The display
tells you the time remaining and
tells you more accurately, as the drying cycle pro-
gresses
(Fig. 3.2.1).
F F
G G
Drying - Cooling down - End of program
Program progress:
3.1 - T HE CONTROL PANEL
Programs dial
Buzzer B B
A A Anti-creasing
Timer D D
C C Delayed start
Display F F
E E Start/Pause G G
3.2 - P ROGRAMMING A DRYING CYCLE
Your dryer is equipped with a sensor which automatically detects the moment when your laundry is dry.
The display shows you how much time remains
before your program starts. The last hour is decrea-
sed in minutes.
Once the time delay has expired, the program
actually starts. The display tells you the time remai-
ning, which becomes more precise as the drying
cycle progresses.
F F
A DDING OR REMOVING AN ITEM DURING DRYING
— Press the “Start/Pause” button to inter-
rupt drying or open the door.
The display flash (Fig. 3.2.3).
— Insert or remove the item or items and close the
door.
— Press the “Start/Pause” button
to
resume drying .
A LTERING PROGRAMMING OR DRYING DURING
OPERATION
— Press the “Start/Pause” button to inter-
rupt drying.
The display flash (Fig. 3.2.3).
— Select another program.
— Press the “Start/Pause” button
to
resume drying.
B UZZER OPTION
— Press the “Buzzer” button . At the end of
drying, three beeps will sound every minute for one
hour until the door is opened or the appliance is
stopped
(Fig. 3.2.4).
A NTI - CREASING OPTION
— The “Anti-creasing” option fluffs the textiles every
10 minutes for up to 24 hours, until the door is ope-
ned or the machine is turned off. It begins as soon
as the drying finishes and prevents the clothes from
settling in the machine.
— To select this function, press the “Anti-creasing”
button
(Fig. 3.2.5). C C
B B
G G
G G
G G
G G
SFE-820CE
A B C D E F G