Fagor SF-800CB - Manual (Page 12)

23
EN
22
EN
and/or buttons and the time remaining will start
to flash (Fig. 3.2.7).
— Proceed to empty your condensate container (see
the “REGULAR MAINTENANCE” section).
— Press the “
Start/Pause” button to restart
your program.
N OTE :
— The "Buzzer" option remains selected from one
program to the next. Just press the button once to
deselect the option.
G
C
T IMER DRYING PROGRAMS
— Select the drying time by turning the Time selec-
tor to the desired drying time.
— Choose your laundry by pressing the Laundry
choice and/or buttons (Fig. 3.2.1).
C B
A
— Press the “ Start/Pause” button to start
your program.
The
display tells you the time remaining.
D ELAYING A PROGRAM ’ S START (Fig. 3.2.2)
— Choose either an automatic dryness detection
program, or a timed drying program, by turning the
Time selector
.
— Choose your laundry by pressing the Laundry
choice and/or buttons.
G
C B
A
F
— Press the “Delayed Start” button to delay
the start of your program from hour to hour until
you reach the desired delay time (max 24 hours).
— Confirm by pressing the “
Start/Pause” button
.
G
D
A DDING OR REMOVING AN ITEM DURING DRYING
— Press the “Start/ Pause” button to inter-
rupt drying or open the door.
The
Laundry choice indicators and the display
flash (Fig. 3.2.3).
— Insert or remove the item or items and close the
door.
— Press the “
Start/Pause” button to
resume drying .
A LTERING PROGRAMMING OR DRYING DURING
OPERATION
— Press the “Start/ Pause” button to inter-
rupt drying.
The
Laundry choice indicators and the display
flash (Fig. 3.2.3).
— Select another program.
— Press the “
Start/Pause” button to
resume drying.
C LEAN CONDENSER WARNING
The “Condenser warning” light will flash
fromtime to time to remind you that you should
clean the condenser
(Fig. 3.2.5).
Do not forget to do this as soon as possible,
since the warning will disappear when the
next program starts.
G
G
G
G
The display shows you how much time remains
before your program starts. The last hour is decrea-
sed in minutes.
Once the
time delay has expired, the program
actually starts. The display tells you the time remai-
ning, which becomes more precise as the drying
cycle progresses.
B UZZER OPTION
— Press the “Buzzer” button . At the end of
drying, three beeps will sound every minute for one
hour until the door is opened or the appliance is
stopped
(Fig. 3.2.4).
E
F
3 - PROGRAMMING 3 - PROGRAMMING
(continued)
3.1 - T HE CONTROL PANEL
3.2 - P ROGRAMMING A DRYING CYCLE
Your dryer is equipped with a sensor which automatically detects the moment when your laundry is dry.
— You access the
automatic dryness detection programs by turning the Time selector to .
— If you wish to adjust the time for the cycle yourself (so that laundry is slightly damp for immediate ironing, for
example, or for extra drying or to dry just a few pieces of laundry) use
timed programs with set drying times.
S TARTING THE APPLIANCE
— Check that the power cable is plugged in, and if the door is properly closed.
A U T O
A
10
180
min
140
160
120 100 80
60
50
40
20
30
A U T O Condensing kg
SF-800CB
8
Cl as s B
A B C D E F G
Time selector
Laundry choice Cotton B
A Laundry choice Mixed
Delayed start D
C Buzzer
Display F
E Start/Pause G
C OOLING CYCLE
All programs finish with a cooling cycle that lasts for
a few minutes to allow the washing to cool gra-
dually.
Do not stop your dryer before this cycle has
finished.
S TOPPING THE APPLIANCE
At the end of the program, the "STOP" light flash
and the display shows "0:00" (Fig. 3.2.6).
The “Filter” and “Tank Full” lights flash to
remind you that you must clean the filter and empty
the water collection tank after every drying cycle:
— Turn the
Time selector to the “Off” position
.
— Empty your dryer.
— Clean the
filter and empty the condensate contai-
ner (see the “REGULAR MAINTENANCE” section).
T ANK F ULL WARNING DURING CYCLE
If the tank is full before the end of the drying cycle,
the machine shuts off.
The
“Tank Full” light , the Laundry choice B
A
4 - REGULAR MAINTENANCE
4.3 - C LEANING THE CONDENSER
The condenser must be cleaned twice a
month.
— Unplug the power cable from the socket before
cleaning the condenser.
Clean it as follows:
— Open the grill at the front of the appliance.
— Release the condenser and remove it carefully
(Fig. 4.3.1).
— Remove any fluff from the condenser. Clean it with
water only under the tap
(Fig. 4.3.2).
— After cleaning, ensure that none of the tubes are
“blocked” and that the fins are clean.
— Rub it superficially.
— Re-insert the condenser and lock it in place. Close
the grill.
When refitting the condenser, ensure that it
is pushed in firmly right to the back of its
housing when locking it in.
4.1 - C LEANING THE FILTER
This is located in the lower part of your dryer.
Clean it as follows:
— Remove it from its housing by pulling it upwards
(Fig. 4.1.1).
— Open the filter and clean it by removing the thin
coating of fluff covering it
(Fig. 4.1.2).
— Re-insert it in its housing, pushing it well in.
The filter must be cleaned after every
drying. Do not wash it with water (Fig. 4.1.3).
4.2 - E MPTYING THE CONDENSATE CONTAINER
This is located at the top or bottom of your
appliance (according to model), and it recovers the
water extracted from your items during drying.
— To empty it, release it from its housing by pulling
it towards you
(Fig. 4.2.1).
The condensate container must be emptied
after each drying cycle (Fig. 4.2.2).
— Empty the condensate container if there is a risk
of frost, or if you wish to move or tilt your
appliance.
3.2 - P ROGRAMMING A DRYING CYCLE
P ROGRAMS AUTO
— Turn the Time selector to the AUTO position.
An « - A - » (for Automatic mode) is then shown on
the display (Fig. 3.2.1)
— Choose your laundry by pressing the Laundry
choice and/or :
C B
A
F
COTTON - : Laundry choice button : For
loads consisting of household linen, terry towelling
and cotton clothes and underclothes.
MIXED -
: Laundry choice button : For
loads consisting of items of different types (cotton
and hard-wearing synthetic articles) or made from
mixed fibres.
DELICATES -
: Laundry choice buttons B
C
B
and (simultaneous key press): For laundry that
are particularly temperature-sensitive (e.g. made
from acrylic fibres).
The drying temperature is regulated to suit the type
of textile selected.
— Press the “
Start/Pause” button to start
your program.
The two segments situated either side of the
« A »
flash alternately (Fig. 3.2.1).
About 20 minutes before the end of the cycle, the
display
shows you how much time is left.
G
C
F