ATI Technologies RADEON X800 - Manual (Page 56)

50 Installing the CATALYST™ Software Suite
To install and detect your new hardware
1 Click Next to allow Windows® to search for the Standard VGA or
Standard PCI Graphics Adapter.
If prompted for the Windows® CD-ROM, insert it into your CD-ROM
drive.
2 Type the following: D:\<Operating System name> for example
D:\WinXP .
If D is not your CD-ROM drive, substitute D with the correct drive
letter.
3 Click OK .
4 Click Finish to close the Wizard and then restart your system.
Installing the CATALYST™ Software Suite
ATI’s CATALYST™ software suite provides you with all you need to get
the most out of your ATI Graphics Accelerator card. The CATALYST™
software suite comprises four, distinct software elements:
• Driver.
• Multimedia Center.
• HydraVision (not included in the Express Install).
• Remote Wonder Software.
To ensure you install supported software, use the ATI Installation CD-
ROM that shipped with your ATI Graphics Accelerator card.
To install the CATALYST™ Software Suite
1 Insert the ATI INSTALLATION CD-ROM into your CD-ROM drive.
If Windows® runs the CD-ROM automatically, proceed to step 6.
2 Click Start .
3 Select Run .
4 Type the following: D:\ATISETUP
If D is not your CD-ROM drive, substitute D with the correct drive
letter.
5 Click OK .
6 Click Install under Software Install.
7 Click Next .
8 Click Yes to the license agreement.