Hawk Industries T-Wrex Sr. Manual Serial Numbers 100 to 105 - Manual (Page 76)

76
Maintain:
Wrenches:
Grease wrench nut threads
Check dies for wear, replace if slipping
Spinner:
Check chain for wear
Hit OILER button for 3-5 seconds every third or fourth spin
Grease:
Zerk fittings in and around:
Spinner
Wrench head
Main rotation bearing assembly (PN 51220)
Check:
Hydraulic oil level in power unit (PN 51640)
Air filter indicator, replace filter if indicator is red
Hydrualic oil filter indicator, replace filter if indicator is red
Routine Maintenance
Equipment must be maintained on a routine basis.
*Failure to conduct routine maintenance could result in equipment damage or injury to
personnel.
Proper Use of Equipment
Hawk equipment is designed for specific functions and applications, and should be used only for
its intended purpose.