MIPRO ACT-100A Dual-Channel Diversity Receiver - Manual (Page 6)

5. How To Select a Group:
(a) Manual Group Set-up: Press and hold GROUP button for at least 1 second the
GROUP LED screen start flashing. If Group button is not press again within 5
seconds the existing Group will stay unchanged. If Group button is pressed once
and hold within 5 seconds it will move to the next group. If Group button is
pressed and hold continuously it will move to next group until you release the
Group button.
6. Change when:
(a) Existing group is being interfered or group is malfunction.
(b) Select group for multiple non-interference usage.
Group
a) Press and hold "GROUP" button for at
least 1 second.
B) LED screen flashes. GROUP
d) When button is released
the selected group will be saved
automatically.
Group c) Press " " button and hold again
will move to another numeric channel.
GROUP
16 3
5 18
B
NOISE
B
NOISE
B
NOISE
B
NOISE
8 9
Dual Channel Wireless Receiver Dual Channel Wireless Receiver
1. Press ACT Button once and release to activate the ACT function.
The Group LED and Channel LED screens will start flashing.
2. Position the red "ACT" marking on the handled or bodypack transmitter
within 30cm towards the ACT Button on the receiver as illustrated in
below diagram (see diagram 8) .
3. If ACT was synced successfully, the Group LED and Channel LED screens
will stop flashing.
2 20
1. Since the installation of antenna influences the operating efficiency of the
receiver, the most important rule is to minimize the distance between
receiving antenna and microphone for better reception and performance.
2. The external DC power supply should not fall under 12V, otherwise it
would not work properly. If it is over 15V, some components of the
receiver will be damaged.
3. When using multi-channel systems simultaneously, proper channel
frequency selection is very important to avoid mutual interference.
4. Do not use this apparatus near water or any vessel full of liquid (ex. do
not put a vase onto the apparatus).
5. ACT Button
6. Cautions
2 20
< 30cm (12 in.)
OR