MIPRO ACT-30Hr Remote Volume Control Handheld Transmitter - Manual (Page 3)

Top Grille: Protects detachable microphone
capsule module and internal foam prevents
breathing, wind and POP noises.
LCD Screen: Displays group, channel, battery
status and error codes.
Ascertain the power is turn "ON" to see battery
status.
! Normal Battery: Red indicator is on for a
second and goes off after power on.
! Weak Battery: Red indicator stays on
continuously after power on. Recharge or
insert a new recharged battery.
! No red indicator light: battery is
completely drained or polarity inserted
incorrectly.
Power On/Off Switch: Slide the power switch
to the “ON” position for use or to the “OFF”
position when not in use.
Lockable On/Off Switch: Slide the switch to
the “ON” position after power-on to avoid
accidental power off during performance. Slide
the switch to “OFF” position before power-off
and conserve battery power.
Housing: Upper portion connects to the
microphone capsule module. Internally it holds
the transmitter PCB and battery compartment.
Battery Compartment: Accommodates 2 AA
alkaline.
ACT Infrared (IR) Port: Receives signals from
receiver to synchronize frequencies.
decrease or to increase volume loudness
wirelessly.
Battery Compartment Cover: Protects battery
compartment and holds batteries.
Color-Coded Ring: Available in different colors
for channel differentiation.
Remote Volume Control Buttons: Press to
2 3
1
2
3
4
5
6
7
8
9
10
11
Handheld Transmitter Handheld Transmitter