KEMP Xen - Manual (Page 11)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 11 / 18
VLM for Xen (Para Virtualized)
Installation Guide
16. In the Network Interface 0 screen, enter the IP address of the eth0 interface, the
network facing interface of the LoadMaster, in the Interface Address input field.
17. Click on the Set Address button
18. Click on the eth1 menu option within the Interfaces section
19. In the Network Interface 1 screen, enter the IP address of the eth1 interface, the farm-
side interface of the LoadMaster, in the Interface Address input field.
20. Click on the Set Address button
This interface is optional, depending on the network configuration.
21. Click on the Local DNS Configuration > Hostname Configuration menu option.
22. In the Hostname configuration screen, enter the hostname into the Current Hostname
input field.
23. Click on the Set Hostname button.
24. Click on the Local DNS Configuration > DNS Configuration menu option.
25. In the DNS configuration screen, enter the IP address(es) of the DNS Server(s) which
will be used to resolve names locally on the LoadMaster into the DNS NameServer input
field.
26. Click on the Add button.
27. Enter the domain name that is to be prepended to requests to the DNS nameserver into
the DNS NameServer input field.
28. Click on the Add button.
29. Click on the Route Management > Default Gateway menu option.
30. In the DNS configuration screen, enter the IP address of the default gateway into the
IPv4 Default Gateway Address input field.
31. If you have an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway
Address input field.
32. Click on the Set IPv4 Default Gateway button.