KEMP ProLiant DL - Manual (Page 12)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 12 / 16
LoadMaster for HP ProLiant
Installation Guide
Select the Local DNS Configuration > Hostname Configuration menu options.
Figure 2-10: Set Hostname screen
In the Hostname configuration screen, enter the hostname into the Current Hostname
input field.
Click the Set Hostname button.
Click the Local DNS Configuration > DNS Configuration menu option.
Figure 2-11: DNS configuration screen
Enter the IP address(es) of the DNS Server(s) which will be used to resolve names locally
on the LoadMaster into the DNS NameServer input field.
Click the Add button.
Enter the domain name that is to be prepended to requests to the DNS nameserver into
the DNS NameServer input field.
Click the Add button.
Select Route Management > Default Gateway from the main menu.
Figure 2-12: Default gateway screen
In the Default Gateway(s) screen, enter the IP address of the default gateway into the
IPv4 Default Gateway Address input field.
If you have an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway
Address input field.
Click the Set IPv4 Default Gateway button.
The LoadMaster is now fully installed and ready to be used. For further information on how to
configure and implement the LoadMaster, please refer to the LoadMaster documentation which
can be downloaded from the
http://www.kemptechnologies.com/documentation page.