Myron L TH1 User Manual
Page 7
3
C. Specification Chart
pH
(TPH1 &
TH1)
Conductivity
TDS
Temperature
Ranges
0-14 pH
0-9999 µS/cm
10-20 mS/cm in
3 autoranges
0-9999 ppm
10-20 ppt in
3 autoranges
0-71°C
32-160°F
Resolution
0.01 pH
0.1 (<1000 µS)
1.0 (<10 mS)
0.01 (>10 mS)
0.1 (<1000 ppm)
1.0 (<10 ppt)
0.01 (>10 ppt)
0.1°C/F
Accuracy
±0.01 pH
±1% of reading
±0.1°C/F
Auto Temperature
Compensation
0-71°C
32-160°F
0-71°C
32-160°F
Conductivity or
TDS Ratios
KCl, NaCl, or 442™
D. Warranty/Service
The Myron L TechPro II™, excluding the pH sensor (TPH1 & TH1), has
a Two (2) Year Limited Warranty. The pH sensor (TPH1 & TH1) has a
Six (6) Month Limited Warranty. If an instrument fails to operate properly,
see Troubleshooting Chart, pg. 22. The battery and pH sensor (TPH1)
are user-replaceable. For other service, return the instrument prepaid to
the Myron L Company.
MyRON L COMPANy
2450 Impala Drive
Carlsbad, CA 92010-7226 USA
+1-760-438-2021
E-Mail: [email protected]
www.myronl.com
If, in the opinion of the factory, failure was due to materials or workmanship,
repair or replacement will be made without charge. A reasonable service
charge will be made for diagnosis or repairs due to normal wear, abuse
or tampering. This warranty is limited to the repair or replacement of the
TechPro II only. The Myron L Company assumes no other responsibility
or liability.
E. TechPro II™ Series Models
MADE IN USA
TechPro II Models
TH1
TP1
TPH1
Parameters
pH &
Conductivity,
Conductivity,
Temperature
TDS &
TDS, pH &
Temperature
Temperature