Dynalab SB500/230V/50 - Manual (Page 5)

3
Servicing and Repair
This product range does not require any routine
servicing.
Note: There are no internal user
replaceable parts
In the event of product failure any repair or
replacement of parts should only be undertaken
by suitably qualified personnel. For advice or to
receive a service manual please contact the
Technical Service Department of Barloworld
Scientific Ltd. quoting model and serial number.
Only spare parts supplied or specified by
Barloworld Scientific Ltd. or its agents should be
used. Fitting of non-approved parts may affect
the performance of the safety features designed
into the instrument.
Note: The magnetic stirrer drive utilises
strong magnets.
If in any doubt, please contact the Technical
Service Department of Barloworld Scientific Ltd.
or the point of sale.
Barloworld Scientific Ltd.
Stone, Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121
Fax: +44 (0) 1785 813748
e-mail [email protected]
www.barloworld-scientific.com
Warranty
Barloworld Scientific Ltd warrants these
instruments to be free from defects in material
and workmanship, when used under normal
laboratory conditions, for a period of two (2)
years. In the event of a justified claim Barloworld
Scientific will replace any defective component or
replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
installation, adaptation, modification, fitting of
non approved parts or repair by unauthorised
personnel.