Team Associated RC10B5M - Manual (Page 17)

17
:: Wheels / Tires and Body - Bag K - Step 4
:: Wheels / Tires and Body - Bag K - Step 4
Painting Tips:
Your B5M Team Kit comes with a clear polycarbon-
ate body. You will need to prep the body before you
can paint it. Wash the inside thoroughly with warm
water and liquid detergent. Dry the body using a
clean, soft, lint-free cloth. Use the supplied window
masks to cover the windows from the INSIDE of the
body (RC cars get painted from the inside). Using
high quality masking tape, apply tape to the inside of
the body to create a design. Spray (use either rattle
can or airbrush) the paint on the inside of the body
(prefferably dark colors first, lighter colors last).
NOTE: ONLY use paint that is recommended for use
with (polycarbonate) plastics. If you do not, you can
destroy the plastic body!!!!.
After paint has completely dried, cut the body along
the trim lines. Make sure to drill or use a body reamer
to make the holes for the body mounts and antenna!
:: Wheels / Tires and Body - Bag K - Step 3
Racers Tip:
Instead of using the included body clips
(#21173), you can use hook and loop tape
on the inside of the body, and the sides of
the chassis to keep your body in place!
21173
Small
Body Clips
21173
Small
Body Clips
91537
Clear Body,
B5M
91531
Wing Angle
Shim
91471
Clear Wing,
B5
21173
Small
Body Clips
x2
x2
x2
91531
RC10B5M
Rear
Body Mounts
89222
M2.5 x 8mm
SHCS
x2