Team Associated SC10.2 - Manual (Page 14)

14
:: CVA and Turnbuckles Build - Bag F-FF - Step 3
:: CVA and Turnbuckles Build - Bag F-FF - Step 4
:: Shocks Build - Bag G-GG - Step 1
Build x2 (right and left side)
Orient the notch
to the left
throughout the
car. It indicates
which end has the
left hand threads!
!
91308
12mm shock
piston
(1.6 front)
(1.7 rear)
91306
27.5x3 TiN
shock shaft
(front)
91307
35x3 TiN
shock shaft
(rear)
6299
1/8 E-clip
6299
1/8 E-clip
4187
Nylon spacer,
(.030)
Racers Tip:
Use a marker over the
numbers on the pistons to
make them easily visible!
!
Front:
4 spacers
Rear:
2 spacers
2.10” (53.5mm)
Steering Turnbuckle
7230
ball cup
(large)
1417
2.80”
Ti turnbuckle
x2
Build x2 (right and left side)
Build x2
(right and left side) 7369
1/16
roll pins
9892
12mm aluminum
clamping wheel
hex, rear
9898
2-56x3/16
shcs
9645
2-56x1/8
bhcs
31286
FT ballstud
washer,
aluminum
(1mm)
9622
Hinge pin,
rear outer
9630
.030 ballstud
washer