Minka Group F620-DBB - Manual (Page 18)

9
Fig. 18
NOTE: Before starting installation, disconnect the power by turning off the circuit breaker or
removing the fuse at fuse box.
Step 1. Remove the 3 screws from the mounting plate.
Step 2. Place the light kit attached close to the mounting plate, firmly snap the wire molex
together. (Fig. 18)
Step 3. Carefully place the light kit assembly over the mounting plate and secure it with the 3
screws. (Fig. 18)
INSTALLING THE LIGHT KIT
SCREWS
LIGHT KIT
ASSEMBLY
MOUNTING PLATE MOLEX