Minka Group F614-PW - Manual (Page 15)

6
Step 1. Slide the canopy up to ceiling and over the 2 screws on the hanger bracket.
Rotate canopy clockwise. Next, while holding the canopy with one hand, slide the
canopy cover over the screws and rotate clockwise until tight. Note: adjust the canopy
screws as necessary until the canopy and canopy cover are snug. (Fig. 15)
Fig. 15
FINISHING THE INSTALLATION
OUTLET BOX
HANGER
BRACKET
SCREWS
CANOPY
CANOPY
BOTTOM
COVER