Addonics Technologies 3-TO-5 SA DISK ARRAY AE5RCS35NSAW - Manual (Page 4)

Addonics Technologies – 3-to-5 SA Disk Array User’s Guide v1.0 3
Chapter 1
General Information
The Addonics 3-to-5 Disk Array system makes implementing sophisticated
RAID technology into any computer simple. Designed to accommodate up to
five 3.5" SATA or SATA II hard drives into three 5 ¼” drive bay, each hard
drive can be easily secured inside or removed from the Disk Array rack with
the simple aluminum drive drawer.
Features
•
Disk Array 5SA - for installing 5 SATA hard drives into three 5 1/4" drive
bay stack
•
Can be used as an external RAID system using optional external power
adapters(See
power supply requirement below)
•
High throughput up to 150 MB/sec with SATA and 300 MB/sec with
SATA II
•
Full Serial ATA 1.0 and 2.0 compliant
•
Aluminum frame and drive drawer
•
Choice of black color bezel or ivory color bezel
•
Innovative lock and handle for each drive drawer
•
Drive drawer can be interchanged with the ABS plastic version of the
Drive Cartridge System SA35 .
•
Use as an external RAID system (require optional external power adapter)
•
Hot swap (1) support
•
Point to point connection, no cabling needed to install the hard drive into
the drive drawer
•
SATA 15 pin and standard 4 pin PC power connector
•
Power switch/LED indicator and over temperature buzzer alarm
•
Fan switch/LED indicator and failure buzzer alarm
•
Power switch/LED for each har d drive
•
Drive can be removed and used as an external Serial hard drive on other
computers with an optional
Serial ATA power adapter.