Minka Group F521-WHF - Manual (Page 17)

Fig. 18
INSTALLING THE LIGHT KIT MOUNTING PLATE
Step 1. Remove 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not
remove)
Step 2. Place the key holes from the light kit mounting plate over the 2 screws previously
loosened from the mounting ring, turn Light kit mounting plate until it locks in place at the
narrow section of the key holes. Secure by tightening the 2 screws previously loosened and
the one previously removed. (Fig. 18)
9
LIGHT KIT
MOUNTING
PLATE
SCREWS
MOUNTING RING