Minka Group F647-ORB - Manual (Page 17)

Step 2. Mount the glass shades to the light kit by unscrewing partway the thumb screws on the glass
holders, inserting the glass, then gently tightening the thumb screws by hand evenly to the
glass. DO NOT OVER TIGHTEN.
DO NOT OVER TIGHTEN. (Fig. 18) Repeat process with other glass shades.
Step 3. Install 3 x 60W/E12 base candelabra bulbs (included).
BULBS
GLASS SHADES
LIGHT KIT
THUMB
SCREWS
Fig. 18