Goulds Pumps 4550 - IOM - Manual (Page 3)

FOREWORD
This manual provides instructions for the Installation, Operation, and Maintenance of the ITT Goulds
Model 4550 Non-Metallic Vertical Process Pump. This manual covers the standard product plus
common options that are available. For special options, supplemental instructions are supplied. This
manual must be read and understood before installation and start-up.
The design, materials, and workmanship incorporated in the construction of ITT Goulds pumps makes
them capable of giving long, trouble-free service. The life and satisfactory service of any mechanical
unit, however, is enhanced and extended by correct application, proper installation, periodic inspection,
condition monitoring, and careful maintenance. This instruction manual was prepared to assist operators
in understanding the construction and the correct methods of installing, operating, and maintaining these
pumps.
ITT Goulds shall not be liable for physical injury, damage, or delays caused by a failure to
observe the instructions for installation, operation, and maintenance contained in this manual.
Warranty is valid only when genuine ITT Goulds parts are used.
Use of the equipment on a service other than stated in the order will nullify the warranty, unless written
approval is obtained in advance from ITT Goulds Pumps.
Supervision by an authorized ITT Goulds' representative is recommended to assure proper installation.
Additional manuals can be obtained by contacting your local ITT Goulds representative or by calling
1-800-446-8537.
THIS MANUAL EXPLAINS
n
Proper Installation
n
Start-up Procedures
n Operation Procedures
n
Routine Maintenance
n Pump Overhaul
n Troubleshooting
n
Ordering Spare or Repair Parts
4550 IOM 5/08
5