Spare parts, Ordering spare parts, Recommended spares – Goulds Pumps JC - IOM User Manual
Page 29
SPARE PARTS
ORDERING SPARE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
JC SECTIONAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ORDERING SPARE PARTS
To insure against possible long and costly downtime
periods, especially on critical services, it is advisable to
have spare parts on hand.
Parts orders will be handled most promptly if the following
directions are followed.
1.
Include pump model and size and its serial number as
shown on the nameplate.
2.
For each part required, include the name and part
number.
3.
State the quantity required for each part.
4.
Provide complete shipping instructions.
RECOMMENDED SPARES
The following are recommended spare parts.
l
1 Suction Liner (100B)
l
1 Impeller (101)
l
1 Lantern Ring (105)
l
5 Packing Rings (106)
l
1 Thrust Bearing (112C)
l
1 Shaft Sleeve (126)
l
1 Radial Bearing (168C)
l
1 Parts Kit, see chart
Parts Kit Chart
Pump Size
Kit Number
1Ч1.5-8, 1.5Ч2-8, 2Ч3-8
520101
1Ч1.5-11, 1.5Ч2-11, 2Ч3-11
520102
1.5Ч2-14, 2Ч3-14
520103
3Ч4-11
520104
3Ч4-14, 4Ч6-14
520105
6Ч6-14 HS
520106
6×6-14 LS
520107
8Ч10-18
520108
10Ч12-22
520109
Parts Kits include thrust bearing locknut, lockwasher and
snap ring, grease seals, and required gaskets and/or
O-rings.
JC IOM 5/08
27
6