Goulds Pumps NM3171 - IOM - Manual (Page 3)

FOREWORD
This manual provides instructions for the Installation, Operation, and Maintenance of the
Goulds Model NM 3171 Non-Metallic Vertical Process Pump. This manual covers the standard
product plus common options that are available. For special options, supplemental
instructions are supplied. This manual must be read and understood before installation
and start-up.
The design, materials, and workmanship incorporated in the construction of Goulds pumps
makes them capable of giving long, trouble-free service. The life and satisfactory service of
any mechanical unit, however, is enhanced and extended by correct application, proper
installation, periodic inspection, condition monitoring, and careful maintenance. This instruction
manual was prepared to assist operators in understanding the construction and the correct
methods of installing, operating, and maintaining these pumps.
Goulds shall not be liable for physical injury, damage, or delays caused by a failure to
observe the instructions for installation, operation, and maintenance contained in this
manual.
Warranty is valid only when genuine Goulds parts are used.
Use of the equipment on a service other than stated in the order will nullify the warranty,
unless written approval is obtained in advance from Goulds Pumps.
Supervision by an authorized Goulds' representative is recommended to assure proper installation.
Additional manuals can be obtained by contacting your local Goulds representative or by
calling 1-800-446-8537.
THIS MANUAL EXPLAINS
n Proper Installation
n Start-up Procedures
n Operation Procedures
n Routine Maintenance
n Pump Overhaul
n Trouble Shooting
n Ordering Spare or Repair Parts
NM 3171 IOM 5/08
3