Instructions – Edgecraft Chef's Choice 480KS User Manual
Page 2
inStructiOnS
Congratulations! You have selected the world’s first professional compact knife
and scissors sharpener, invented and made in the U.S.A. by EdgeCraft: the
world’s leading manufacturer of sharpeners. The EdgeCraft 480KS includes an
assortment of accessories to meet a wide range of sharpening needs. To get the
most from your new compact sharpener please follow these instructions.
The Model 480KS, See Figure 1, consists of the 2-Stage Knife Sharpener, two (2)
diamond coated abrasive pads, and three (3) Scissors Angle Guides.
The sharpener is shown at upper left – Figure 1 with the Fine grit diamond pad in
place on top of the sharpener. That abrasive pad, held in place by a magnetic strip
(not shown) recessed under the pad, can be removed and stored in the compart-
ment under the sharpener.
The sharpener shown in the upper right is turned over to show the open storage
compartment on its underside with the compartment cover removed.
There are two (2) different diamond coated pads, Coarse and Fine. The Fine grit
pad has a ruled groove along its length on the diamond coated side in order that
it can be readily identified. The Coarse grit pad is ungrooved. The abrasive pads
held in place on top of the sharpener by the built-in magnet can be removed from
the magnet with a finger nail or by inverting the sharpener and tapping it lightly
on the table.
There are three (3) differently colored Scissors Sharpener Angle Guides.
Follow the Detailed Instructions carefully to insure perfect results.
Figure 1: Model 480KS Knife and Scissors Sharpener and its components.