ATTO Technology UL25 - Manual (Page 9)

ATTO ExpressPCI Ultra2 User’s Manual Page 5
3. Assign a unique SCSI ID # for each of your SCSI devices.
F
Note: The ATTO ExpressPCI host adapter occupies SCSI ID # 7. Use
IDs 0-6 and 8-15 for your devices.
4. Install the ATTO ExpressPCI host adapter card in a PCI expansion slot. Most
installations require no additional setup.
5. Physically install the SCSI devices.
6. Connect device cabling.
7. If alternate settings are required/requested, configure the ATTO ExpressPCI
host adapter using the ATTO ExpressPCI Utilities (included on the
ExpressPro-Tools CD).