Astatic 220VPW - Manual (Page 2)

Architects’ and Engineers’ Specifications
The microphone will be an inconspicuous, continuously-
variable polar pattern, button-style, condenser boundary
microphone designed for surface installation. The
microphone will have a continuously-variable polar pattern.
The sensitivity of the microphone will be –32dBV (25mv)
@ 1Pa. The frequency response will be 90Hz-17KHz. The
impedance of the microphone will be 120 ohms. The self-
noise will be 24dBA. The maximum SPL will be 120dB.
The microphone will include an integral 80Hz, 12dB/octave
high-pass filter to improve intelligibility. The microphone will
have a 3-pin XLRM-type connector allowing for bottom exit.
The microphone will operate from P12, P24 or P48 standard
phantom power consuming 4mA.
The microphone element and electronics will be enclosed
in a radio frequency resistant housing meeting or exceeding
EN55103-2. The 220VP will be 3-3/8" [85mm] long, 1-1/8"
[28mm] in diameter and stands 3/4" [20mm] above
boundary. The net weight [mass] will be 3.9oz [0.11Kg]. The
packaged weight [mass] will be 5.0oz [0.14Kg]. The 220VP
will have durable matte-black urethane or matte-white
finish.
The Astatic model 220VP or 220VPW is specified.
220VP/220VPW
Continuously-variable Pattern Condenser Boundary Microphone
Astatic Commercial Audio Products
6573 Cochran Rd. Building I Solon, Ohio 44139 U.S.A.
Tel: (440) 349-4900 Fax: (440) 248-4902 Sales: (800) 421-3161
www.astaticinstalled.com
Two-Year Limited Warranty
Astatic Commercial Audio Products hereby warrants that this product will be free of defects
in material and workmanship for a period of two years from the date of purchase. In the
unlikely event that a defect occurs Astatic will, at its option, either repair or replace with a
new unit of equal or greater value. Retain proof of purchase to validate the purchase date
and return it with any warranty claim.
This warranty excludes exterior finish or appearance, damage from abuse, misuse of the
product, use contrary to Astatic’s instructions or unauthorized repair. All implied warranties,
merchantability, or fitness for a particular purpose is hereby disclaimed and Astatic hereby
disclaims liability for incidental, special or consequential damages resulting from the use or
unavailability of this product.
This warranty gives you specific legal rights and you may have other rights that vary from
state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above exclusions and
limitations may not apply to you.
Note: No other warranty, written or oral is authorized by Astatic Commercial Audio Products.
Shipping Instructions
Please call our customer service department at 440-349-4900 for a pre-approved return
authorization number.
Carefully repack the unit and return the insured package to: Astatic Commercial Audio
Products, 6573 Cochran Road, Building I, Solon, Ohio 44139.
RETURNS WITHOUT A PRE-APPROVED RETURN AUTHORIZATION NUMBER WILL BE
REFUSED.
If outside the United States, contact your local dealer or distributor for warranty details.
©2008 Astatic Commercial Audio Products
Part No. 46873-87-00 Jun2008
Specifications †
Operating Principle............................................ Condenser
Polar Pattern ........................................Continuously-variable
Frequency Response ....................................... 90Hz -17KHz
Sensitivity .........................................-32dBV (25mV) @ 1 Pa
Impedance .............................................................120 ohms
Maximum SPL .................................120dB, 1% T.H.D., 1KHz
Self Noise ...................................................................18dBA
Power Requirements ............................P12, P24, P48, 4mA
Connector ...................................................3-pin XLRM-type
Polarity ................................ Positive pressure on diaphragm
corresponds to positive voltage on pin 2
relative to pin 3 at XLR3M-type connector.
Finish ......................................Durable matte-black urethane
or white (220VPW)
Dimensions .....................................................(See drawing)
Net Weight [Mass] ......................................... 3.9oz [0.11Kg]
Packaged Weight [Mass] ............................... 5.0oz [0.14Kg]
RF Immunity ......................... Meets or exceeds EN55103-2,
E1, E2, E3 and E4
RoHS Compliant
†Specifications subject to change without notice.
Included Accessories ..............................2 rubber bushings,
hex nut and washer
Omnidirectional
Cardioid
Figure-of-eight