ALESIS iMultiMix 8 USB - Manual (Page 7)

Introduction
5
How to Use This Manual
This manual is divided into the following sections describing the
various functions and applications for the iMultiMix 8 USB. While
it's a good idea to read through the entire manual once carefully,
those having general knowledge about mixing should use the table
of contents to look up specific functions.
Chapter 1: Getting Started shows you how to include the iMultiMix 8
USB in your audio setup for recording and live applications. We’ve
included a hookup diagram, guidelines for which cables to use and
the vital steps you must take to set levels properly.
Chapter 2: A Tour of the iMultiMix describes the iMultiMix 8 USB
piece by piece. This chapter also features diagrams of the mixer to
help you find each component as you read about it.
Chapter 3: Digital Effects Processor explains the effects provided by
the on-board digital effects processor. If you want to know what a
certain effect will do to your sound before you select it, this is
where you should look.
Chapter 4: Applications outlines a number of scenarios in which you
can use the iMultiMix 8 USB, including some tips on what goes
where when you’re hooking everything up.
Chapter 5: Troubleshooting can give you a hand if you’re
experiencing problems with your mixer. You’ll find that most
issues can be resolved simply and quickly with the push of a
button.
Chapter 6: Specifications and Chapter 7: Block Diagram are full of
technical information for the more advanced users.
And at the end of this manual you’ll see a glossary of common
mixing-related terms and a page about the iMultiMix 8 USB’s
warranty.
Helpful tips and advice are
highlighted in a shaded box
like this.
When something important
appears in the manual, an
exclamation mark (like the
one shown at left) will appear
with some explanatory text.
This symbol indicates that
this information is vital when
operating the iMultiMix 8
USB.