Australian Monitor AMIS120 - Manual (Page 4)

F R O N T PA N E L
PAG E 4 A M I S S E R I E S I N S TA L L AT I O N & O P E R AT I O N M A N UA L
2 3 4 1 5 6
CH 1-6
These control the individual level for each channel
input.
BASS
There is 12dB of cut and boost at 100Hz. This EQ is the
shelving type.
TREBLE
There is 9dB of cut and boost at 10kHz. This EQ is the
shelving type.
MASTER
This controls the overall output level.
ON
This LED indicates the unit is powered “on”.
NOTE: When using the “24VDC” in
terminals, the amplifier is ‘on’ and the
power LED will always be on regardless
of the position of the power switch.
POWER
This switch switches power on or off from the
mains. The up position is on.
NOTE: When using the “24VDC” in
terminals, the amplifier is ‘on’ regardless
of the switch position.
1
2
4
5
3
6
AMIS SERIES 60/120 manual.indd 4 2/7/07 12:42:32 PM