Australian Monitor AV2.4P - Manual (Page 5)

C O N T R O L S , C O N N E C T O R S & I N D I C AT O R S
PA G E 5 AV 2 . 2 P / AV 2 . 4 P – O P E R AT I O N M A N U A L
3 4 3 5
Status Indicators for Channels A and B
These are dual colour LEDs which indicate the status of the output stage.
They indicate three levels of operation:
Below 1 watt( unlit )
1 watt and above( green )
Clipping( red )
Power ON indicator
This LED will illuminate Blue to indicate that the amplifi er is ON and is receiv-
ing the mains power.
Attenuators for Channels A and B
Level control for the amplifi er is provided by potentiometers on the front panel.
There are two such controls, one for each channel.
Power ON Switch
Press the switch upwards for power On and downwards for power Off.
Rack Ears
The amplifi er is supplied with a pair of Rack Ears for mounting the amplifi er in
a 19” Rack.
Front Panel
5
The AMAV AV2.2P/AV2.4P amplifi ers differ only slightly in their size and share the same features on their front panels. Figure 1 shows
the panel layout of an AV2.2P. It is similar to the AV2.4P. The functions of the controls and indicators are as follows:
1 4
2
3
1 2 1