Vantech H1 Rack 4 Bar System for a GMC Savana 1996-On - Manual (Page 6)

6
-Tightly secure hardware.
-Upright mounting base will crimp the drip rail and angle outwards as hardware is tightened.
W008
B016
N005
90°
Push the upright so it’s
90 degrees then secure
with tap screws.
90°
B201
Velcro Strap Ladder Stopper
- Ladder Stopper can be
installed in the front bar with tip
facing the rear, allowing the ladder
steps to fit in between. The bend
of the Ladder Stopper prevent the
ladder from rattling.
(reAr BAr)
A06
A02
(FronT BAr
)
l
adder
G
uide
l
adder
S
topper
- Ladder Guide can be installed
in the rear bar to guide ladders
down the system.
B018
B018
n016
n016