Bell & Gossett P2002290A Series e-90 ECM Motor IOM - Manual (Page 8)

Configuration Scenarios
This section provides examples of different configurations and briefly describes how
the motor operates under those conditions.
Operating Parameters
Speed will change linearly based on the On -Board Potentiometer or remote 0-10
VDC signal. The graph below illustrates the operation of a motor adjusted with the
On-Board Potentiometer.
At 0.5 VDC signal, the motor will come on at 300 RPM and ramp linearly to
1725 for Series 60 pumps and 1765 RPM for Series e-90 pumps.
6
AC Line Connections
Check
to see if the line voltage matches the nameplate voltage.