Comfort-Aire REG-183J-20A - Manual (Page 9)

Heat Controller, Inc. Room Air Remote Controller Owner’s Manual
8
7 8
Timer operation
Press the TIMER button can initiate the
Auto-start and Auto-stop setting program
of the unit. The time can be set in range
of 0~24 hours.
To set the Auto-start/stop time.
1. Press the TIMER button, when the TIMER
ON indicator displayed on the LED window
of the air conditioner, it indicates the Auto
Start setting program is initiated. When the
TIMER OFF indicator displayed on the LED
window of the air conditioner, it indicates the
Auto Stop setting program is initiated.
2. Press or hold the Up( ) or Down( ) to
change the Auto time by 0.5 hour increments,
up to 10 hours, then at 1 hour increments up
to 24 hours. The control will count down the
time remaining until start/stop.
3. The selected time will register in 5 seconds
and the air conditioner will automatically
revert back to display the previous temper-
ature setting.
4. Turning the unit ON or OFF at any time
will cancel the Auto Start/stop function.
NOTE: To cancel the TIMER setting, push
the TIMER button and press or hold the Up
( ) or Down( ) until 0 hour is displayed
on the LCD window of the air conditioner.
2
2
1
1
2
2
MODE
MODE
TIMER
TIMER
SPEED
SPEED ONE
TOUCH
ONE
TOUCH
SLEEP
SLEEP To stop the air conditioner 2 hours after setting
and start it again 10 hours after setting.
1. Press the TIMER button until the TIMER
OFF indicator is displayed on the LED display
of the air conditioner.
2. Use the UP/DOWN button to display "2.0" on
the LED display of the air conditioner.
3. Press the TIMER button again to display the
TIMER OFF on the LED display of the unit.
4. Use the UP/DOWN button to display "10" on
the LED display of the unit.
5. Wait for 5 seconds until the previous display
revert back to the LED window.
AUTO STOP AUTO START
(On Stop Start operation)
This feature is useful when you want to stop the
air conditioner after you go to bed, and start it
again in the morning when you wake up or when
you return home.
Example:
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
Example:
AUTO START ATUO STOP
(Off Start Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
To start the air conditioner 5 hours after setting,
and stop it 8 hours after setting.
1. Press the TIMER button until the TIMER
ON indicator is displayed on the LED display
of the air conditioner.
2. Use the UP/DOWN button to display
"5.0" on the LED display of the air conditioner.
3. Press the TIMER button again to display
the TIMER OFF on the LED display of the unit.
4. Use the UP/DOWN button to display
"8.0" on the LED display of the unit.
5. Wait for 5 seconds until the previous display
revert back to the LED window.
8
Heat Controller, Inc. Room Air Remote Controller Owner’s Manual
AUTO