Comfort-Aire RAD-61L - Manual (Page 5)

Heat Controller Room Air Conditioner with R-410A Owner’s Manual
4
Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc.
3
! CAUTION
When the air filter is to be
removed, do not touch the
metal parts of the unit.
It may cause an injury.
Do not clean unit when
power is on as it may cause
fire and electric shock, it may
cause an injury.
Operation with windows
opened may cause wetting
of indoor and soaking of
household furniture.
When the unit is to be
cleaned, switch off, and turn
off the circuit breaker.
Stop operation and close
the window in storm or
hurricane.
Use caution when unpacking and
installing. Sharp edges could cause injury.
Do not clean the air
conditioner with water.
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
This could injure the pet or
plant.
It may cause electric shock
and damage.
Do not put a pet or house
plant where it will be
exposed to direct air flow.
Hold the plug by the head
of the power plug when
taking it out.
Ventilate the room well when
used together with a stove,
etc.
An oxygen shortage may occur.
Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects.
It may cause deterioration of
quality, etc.
It may cause failure of product
or fire.
Do not use for special
purposes.
Turn off the main power
switch when not sing the
unit for a long time.
u
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate
supply by taking the power-plug out and contact a
qualified service technician.
3
!
!
!
!
! !
!
It may cause failure of
appliance or accident.
Appearance may be
deteriorated due to change
of product color or
scratching of its surface.
Do not place obstacles
around air-inlets or inside
of air-outlet.
Do not use strong deter-
gent such as wax or
thinner but use a soft cloth.
If bracket is damaged, there
is concern of damage due to
falling of unit.
There is danger of fire or
electric shock.
Ensure that the installation bracket of
the outdoor appliance is not damaged
due to prolonged exposure.
Do not place heavy object on the
power cord and ensure that the cord
is not compressed.
Operation without filters may
cause failure.
It contains contaminants and
could make you sick.
Always insert the filters
securely. Clean filter once
every two weeks.
Do not drink water drained
from air conditioner.
! !
• It may cause an injury due to sharp
edges of components.
When the air filter is to be
removed, do not touch the
metal parts of the unit
• Water may enter the unit and degrade
the insulation. It may cause an
electric shock
Do not allow water to
enter inside the unit
during cleaning
• An oxygen shortage may occur
• May cause explosion, fire and/or
burns
Ventilate the room well
when used together with
a gas stove or if there is
a gas leak
• Do not clean unit when power is on as
it may cause fire and electric shock
When the unit is to be
cleaned, switch off, and
turn off the circuit breaker
• Operation with windows opened may
allow rain to enter inside and damage
property
Stop operation and close
the window in storm or
hurricane
• It may cause electric shock and
damage
Hold the plug by the
head of the power plug
when taking it out
• It may cause failure of product or fire
Turn off the main power
switch when not using
the unit for a long time
• It may cause failure of appliance or
accident
Do not place obstacles
around air-inlets or inside
of air-outlet
• If bracket is damaged, there is concern
of damage due to falling of unit.
Ensure that the instal-
lation bracket of the
outdoor appliance is
not damaged
• Operation without filters may cause
failure
• Operation with dirty/clogged filters
may cause failure
Always insert the filters
securely. Clean filter
once every two weeks
• Appearance may be deteriorated
due to change of product color or
scratching of its surface
Do not use strong deter-
gents such as wax or thin-
ner; use a damp, soft cloth
• There is danger of fire or electric
shock
Do not place heavy ob-
ject on the power cord
and ensure that the
cord is not compressed
• It contains contaminants and could
make you sick
Do not drink water
drained from air condi-
tioner
• Sharp edges could cause injury
Use caution when un-
packing and installing
If water enters the unit,
turn the unit off at the
power outlet and switch
off the circuit breaker.
Isolate supply by taking
power-plug out and con-
tact a qualified service
technician
!
!
! !
!
!
!
• Water may enter the unit and degrade
the insulation. It may cause an
electric shock
Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual
4
IMPORTANT SAFETY INSTRUCTIONS
Be sure the electrical service is adequate for the model you have
chosen. This information can be found on the serial plate, which
is located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize
shock and fire hazards, proper grounding is important. The power
cord is equipped with a three-prong grounding plug for protection
against shock hazards.
Your air conditioner must be used in a properly grounded wall
receptacle. If the wall receptacle you intend to use is not adequately
grounded or protected by a time delay fuse or circuit breaker,
have a qualified electrician install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.
Do not run air conditioner without side protective cover in place.
This could result in mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.
WARNING For your safety
Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance.
Avoid fire hazard or electric shock. Do not use an extension cord or an
adaptor plug. Do not remove any prong from the power cord.
WARNING Electrical Infor mation
NOTE For some models, the power
supply cord with this air conditioner
contains a current detection device
designed to reduce the risk of fire.
Please refer to the section Operation
of Current Device for details.
In the event that the power supply
cord is damaged, it cannot be
repaired-it must be replaced with a
cord from the Product Manufacturer.
,
,
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.
Power supply cord
with 3-prong grounding plug
and current detection device
Operation of Cur rent Device
(Applicable to the unit adopts current detection device only )
The power supply cord contains a current device that senses damage to the power cord. To test your power
supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button, you will notice a
click as the RESET button pops out.
3. Press the RESET button, again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this it also indicated by
a light on the plug head.)
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply must be replaced if it fails reset when either the TEST button is pushed, or it cannot be
reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it cannot be repaired. It MUST be replaced by one
NOTES:
obtained from the
product manufacturer.
4
Please refer to the section “Operation
of Current Device” for details.
Cooling operation
Outdoor Temp: 64.4-109.4°F (18-43°C) (T
1
Environment) 69.8-125.6°F (21-52°C) (T
3
Environment)
Indoor Temp: 62.6-89.6°F (17-32°C) (T
1
Environment) 62.6-89.6°F (17-32°C) (T
3
Environment)
Heat operation
Outdoor Temp: 23.0-75.2°F (-5-24°C) (T
1
Environment) 19.4-75.2°F (-7-24°C) (T
3
Environment)
Indoor Temp: 32.0-80.6°F (0-27°C) (T
1
Environment) 32.0-86.0°F (0-30°C) (T
3
Environment)