Silverline Rechargeable Torch 3-Function 1 Million Candle Pwr - Manual (Page 7)

6
GB
Operation
1. Switch the Halogen Bulb (4) or LED Light Ring (5) on or off
using the Halogen/LED Ring On/Off Switch (7)
2. Turn the Red LED Warning Light (11) on using the Warning
Light Switch (6)
3. The Stand and Mounting Bracket (8) can be pulled down for
stability when placing the torch down
Maintenance
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause
internal parts to wear quickly, and shorten the machine’s
service life. Clean the body of your machine with a soft brush,
or dry cloth. If available, use clean, dry, compressed air to blow
through the ventilation holes
Storage
• Store this tool carefully in a secure, dry place, away from direct
sunlight and out of the reach of children
Disposal
Always adhere to national regulations when disposing of power
tools that are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and
electronic equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on
the correct way to dispose of power tools
Intended Use
Rechargeable multi-function torch with captive lead-acid battery.
Unpacking
• Carefully unpack and inspect your tool. Familiarise yourself
with all its features and functions
• Ensure that all parts of the tool are present and in good
condition. If any parts are missing or damaged, have such
parts replaced before attempting to use this tool
Before Use
Assembly & initial charging
IWARNING: The sealed lead acid battery in this product will
be drained from storage. The following steps must be taken
to ensure it is charged correctly. This will maximise the
performance and working life of the battery:
1. Press the Halogen/LED Ring On/Off Switch until both the
LED ring and Halogen bulb are OFF
2. Switch the Warning Light Switch (6) to O (off)
3. Plug the Mains Charger (9) in to the mains power supply,
and plug the small end into the charging socket
4. The Charge Indicator (3) will illuminate
5. Leave to charge for a MINIMUM of 16 hours before first use.
Note: If your Torch does not seem to be charging, try the above
steps to MAKE SURE that the Halogen / LED Ring On / Off Switch
(7) is in the OFF position.
Recharging
Note: With this type of battery, it is best to 'top up' the charge
after each use, when possible. If the Torch is not used frequently,
recharge at least every 3 months to maintain battery condition.
• When using the Mains Charger (9), charge an empty battery
for a minimum of 10 hours
• When using the 12V Charger (10), charge an empty battery for
a minimum of 8 hours
1 Handle
2 Charging Socket
3 Charge Indicator
4 Halogen Bulb
5 LED Light Ring
6 Warning Light Switch
7 Halogen / LED Ring On/Off Switch
8 Stand & Mounting Bracket
9 Mains Charger
10 12v Charger
11 Red LED Warning Light
Product Familiarisation
631977_Z1MANPRO1.indd 6 17/09/2013 11:49