Silverline 7.2V Cordless Multi-Tool - Manual (Page 5)

4
GB
Specification
Voltage: ...................................................... 7.2V
Battery Type: .............................................. Li-Ion (Internal)
Battery Capacity: ........................................ 1.3Ah
No Load Speed: .......................................... 4500 -
20000min -1
Speed Settings: .......................................... 16
Collet Size(s): .............................................. Ш1.5, Ш 2.4,
Ш 3.2mm
Sound Pressure(LPA): ................................. 72dB(A)
Sound Power(LWA): .................................... 83dB(A)
Uncertainty: ................................................ 3dB(A)
Vibration: .................................................... 4.10m/s
2
Uncertainty: ................................................ 1.5m/s 2
Charger
Input Voltage: ............................................. 230V AC/50Hz
Output: ....................................................... 9V DC 400mA
Protection Class: ........................................
Charging Time ............................................ 3hrs
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration levels in the specification are determined
according to EN60745. The figures given can be used to compare
similar tools tested to this standard. These figures may be used to
assess exposure to noise and vibration levels.
The figures represent normal use for the tool in normal working
conditions. A poorly maintained, incorrectly assembled or mis-used
tool may produce increased levels of noise and vibration. The total
working period that you can operate this tool must factor in periods
where the tool is idle or switched off. Allow frequent rest breaks
when operating this tool.
It is in the interest of users to maximise their safety using the correct
safety equipment such as ear defenders that protect against loud
or repetitive noise and anti-vibration gloves that minimise vibration.
Do not operate the tool with your hands below a normal comfortable
temperature as vibration will have a greater effect.
www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who
use tools for long periods of time.
Carefully read and understand this manual and any label attached to the tool
before use. Keep these instructions with the product for future reference.
Ensure all persons who use this product are fully acquainted with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Description of Symbols
The rating plate on your tool may show symbols. These represent impor-
tant information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Double insulated for additional protection
Do not incinerate battery packs
Environmental Protection
Waste electrical products and batteries, including li-ion
batteries, should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice
Conforms to relevant legislation and safety standards
959516_Z1MANPRO1.indd 4 21/02/2013 09:40