RMS Technologies USB485 CONVERTER CARD - Manual (Page 8)

RMS Technologies 8 Version 1.00
USB485 Converter Card September 28, 2004
14. Click “Finish.” to complete installation.
15. Once you have clicked “Finish,” Windows should automatically detect another new device. This will begin
the installation of the VCP drivers.
16. Repeat steps 5-14 replacing “RMS Motion Serial Converter” with “RMS Motion USB485.”
Turning on Echo
There is a jumper on the PCB inside the case used to turn on and turn off echo. The Default
position of the jumper is on Pin 2 and Pin 3, echo off. To turn echo on, move the jumper to Pin 1
and Pin2