SawStop 1.75HP User Manual
Page 5
SawStop 10” Professional Cabinet Saw 3
Table of Contents
Using Your Saw
42
Adjusting the Blade Height
42
Adjusting the Blade Tilt Angle
42
Turning on Main Power and Starting the Motor
43
System Status Codes
45
Using the Blade Guard
48
Using the Riving Knife
50
Using the Miter Gauge
50
Cross-Cutting
52
Using a Fence
53
Rip Cutting
54
Using the Saw in Bypass Mode
57
Using a Mobile Base
58
Using an Out-Feed Table
59
Changing the Brake Cartridge
60
Installing a Brake Cartridge
63
What to do if the SawStop® Safety System Activates
64
Making Adjustments to Your Saw
65
Aligning the Table
65
Aligning the Blade to the Tilt Axis
69
Aligning the Blade Elevation Assembly
72
Adjusting the Elevation Limit Stops
74
Adjusting the Tilt Limit Stops and Tilt Angle Indicator
75
Adjusting the Table Insert
77
Aligning the Riving Knife and Spreader to the Blade
79
Adjusting the Quick-Release Clamp
82
Adjusting the Miter Gauge
83
Adjusting the Motor Belt Tension
84
Adjusting the Tilt Gearing
84
Adjusting the Elevation Gearing
85