Muxlab LongReach™ - Manual (Page 7)

© MuxLab Inc. Active CCTV Receiver Balun Installation Guide
Page 7
3.
Installation Procedure
3.1. Pre-Installation Checklist
Warning: Do not connect power supply to video signal
or ground terminals. Unit can be damaged and
warranty will be void.
The Active CCTV Receiver Balun is used to provide
extended distance via a copper twisted pair. Before
installing the product, please verify the following
checklist to ensure that installation takes place
smoothly.
1. The Active Balun is always connected to the
receiver side of a CCTV installation. For example, it
is connected directly to the video input ports of the
CCTV multiplexer, DVR or matrix switcher at the
central monitoring location.
2. The Active Balun is used in conjunction with
MuxLab’s passive CCTV Balun (500009 or
500000). The passive CCTV Balun is connected at
the CCTV source, which is usually the CCTV
camera.
3. For best image quality and operator safety, the
multiplexer or DVR should be properly grounded. If
this is not possible, then the Active CCTV Balun
should be properly grounded. Please ensure that
there is a building ground available. Note: If more