Electrical specifications, Mechanical options – AMF TILT Bowl Mixer (TBM) User Manual
Page 3
ELECTRICAL SPECIFICATIONS
Operator panel is NEMA 4 rated and contains the following:
•
Allen Bradley PanelView 550 operator interface which displays:
- Mixing and refrigeration time
- Dough temperature
- Status and alarm messages
- Editable product codes and recipes
- Total operation time clock
•
Allen Bradley push-buttons for the following functions:
- Mixing (slow, fast, stop)
- Tilting (lower, raise, stop)
- Alarm (acknowledge/reset)
- Safety
- Emergency stop
NEMA 12 remote enclosure (painted steel) including:
- Main breaker
- Full voltage magnetic NEMA rated consequent pole starter
- Allen Bradley SLC 5/03 processor
•
Wash down duty Weg drive motor (aluminum or copper rotor) integral mount with NORD gear reducer
•
Motor overheat protection installed in the stator winding
•
High/low speed jog operation with special anti-jog function
•
Mixer and refrigeration mode selection from operator interface
•
Timer and setpoint based temperature control modes included
•
Safety: Latching safety devices on ingredient and access doors interlocked with agitator motion monitor.
•
Standard voltage 460 and 600 volts / 3 Phase / 60 Hz (other voltages available)
•
Control power: 24 VDC inputs, 120 VAC outputs
MECHANICAL OPTIONS
•
Bowl drain valve
•
Lip extension
•
Bowl end cooling
•
PolarBar refrigerated breaker bar (includes bowl end cooling option)
•
ArcticAgitator cooling package (provides bowl end, breaker bar and
standard agitator cooling)
•
Double extra heavy duty stainless steel primary agitator bars (included
in models 2000 lb. and above)
•
Y-T asymmetrical full split stainless steel agitator
•
Extra liquid inlet
•
Additional flour inlet (available only with butterfly valve)
•
Rear sponge door, air operated hinge type
•
Rear ingredient door with safety bars and agitator motion interlock
•
Solid, full length legs with high performance stainless steel pigmented
gray epoxy paint up to 24” (610 mm)
•
Mechanical overtilt to 140 degrees on 1600 lb. to 3200 lb. models include:
- Integral gearhead brake motor with chain and sprockets
- Caliper and disk bowl lock mechanism
- Air driven hydraulic pump for calipers
•
Mechanical reverse tilt 25 degrees with seal cleaning system
•
Automatic central lubrication system
•
Trough hold down mechanism, manual or air operated
Optional Y-T Agitator
Arctic Cooling
Package