Chemglass CG-1949-X - Manual (Page 3)

2) Insert the reactor clamp into the adjusting plate.
 Make sure that the beveled end is up on the clamp and the knob is facing to the left.
 Place in the slot until it stops.
 Replace the knob and make sure it is hand tight and the clamp does not move.
3) Mount the reaction vessel
 Carefully unpack the reaction vessel.
 Remove knob from reactor clamp and open completely.
(Two people should be used for next step)
 Have one person hold the vessel and place in the clamp with the jacket ports facing left.
 Have the second person close the clamp and tighten until the vessel cannot move.