Chemglass CG-2025 - Manual (Page 6)

6
Model Total End Clearance Top Clearance
In./mm In./mm
1AM/1UP 0.0020/0.0508 0.0015/0.0381
2AM 0.0025/0.0635 0.0015/0.0381
2AM* 0.0025/0.0635 0.0025/0.0635
4AM 0.0035/0.0889 0.0015/0.0381
4AM* 0.0035/0.0889 0.0025/0.0635
6AM 0.0035/0.0889 0.0015/0.0381
8AM 0.0048/0.1219 0.0015/0.0381
16AM 0.0060/.1524 0.0015/0.0381
* Models with the last three digits greater than 500
(i.e. 2AM XXX-501)
Clearances
Disposal (Please note current regulations)
Parts of the air motor or air powered gear motor,
shafts, cast iron or aluminum castings, gear
wheels as well as rolling contact bearings may be
recycled as scrap metal.