Camera direction, Ivs film counter, On/off – ARRI 535B User Manual

Page 55: Ivs film counter on/off, Inser ter facilities

Advertising
background image

55

SUB MENU

STATUS ON
POSITION
SIZE SMALL
BACK-
GROUND BOXED

IVS-FILM
COUNTER ON
-MODE UP
-SET
-RESET
EXIT

> CAM-DIR FWD

SUB MENU

STATUS ON
POSITION
SIZE SMALL
BACK-
GROUND BOXED

> IVS-FILM
COUNTER ON
-MODE UP
-SET
-RESET
EXIT

CAM-DIR FWD

6.4.5 Camera Direction

The camera run direction forward FWD or reverse REV
must be set in the IVS in order to get valid IVS film counter
information in the display windows.

• Move the cursor > with the keys ß and ü to the line

CAM-DIR. The keys ä and ö will switch between
forward and reverse.

6.4.6 IVS Film Counter On/Off

The IVS film counter is an independent footage counter.
It is not slaved to the footage counter of the film camera
and can be used in parallel. It can be switched to be
displayed in the camera status line.

The IVS film counter can be set to count upwards or down-
wards (i. e. to show remaining film stock), it can be set to
any film length or cleared.

Inser

ter Facilities

Advertising