Operating your avistart – Avital AVISTART 4501 User Manual

Page 6

Advertising
background image

Operating Your AviStart

Remote-Controlled Door Lock/Unlock

To Lock the Doors:
Press the remote control C button for 1-2 seconds. The doors will lock, the
parking lights will flash twice and the dash mounted LED will flash slowly. If
the Remote Lock Starter Disable feature was programmed ON, the vehicle
starter motor will be disabled . (See the "Programming Table for System
Features" on page 11.)

To Unlock the Doors:
Press the remote controDbutton for 1-2 seconds. The doors will unlock. The
interior lights will turn on for 30 seconds or until the ignition key is turned on.
The parking lights will flash once and the dash mounted LED will turn off. If
the Remote Lock Starter Disable feature was programmed ON, it will
disengage allowing you to start the vehicle engine.

Two-Stage Unlock Capability

If the optional Two-Stage Unlock feature was installed, press the Dbutton for
1-2 seconds and only the driver door will unlock. Within 3 seconds, press
theDbutton again and the passenger doors will unlock (may require an
optional relay).

User-Programmable Ignition-Controlled Door Lock/Unlock

For the ultimate in security and convenience, the AviStart can be programmed
to automatically lock your doors when the ignition key is turned on or the
engine is started, and will unlock when the ignition key is turned off. This
feature can be programmed ON or OFF. (See the "Programming Table for
System Features" on page 11.)

User-Programmable RPM Door Lock

The system can be programmed to automatically lock the doors when the
engine reaches the factory preset RPM level. (See the "Programming Table for
System Features" on page 11).

When you begin driving, your vehicle doors will automatically lock. When
you turn the ignition key off, the doors will automatically unlock.

NOTE: Ignition-Controlled Door Lock feature must be programmed OFF.

4

AviStart 4501 Owner's Manual 0999

Advertising