Graymills Electric Mixers OMI - Manual (Page 2)

• Ensure motor has adequate access to cooling air flow. Do
not lock mixer shaft with motor energized.
• Wear eye protection and appropriate safety gear when
using mixer.
OPERATION AND SAFETY GUIDELINES
• Place mixer in liquid before starting.
• Make sure mixer is firmly attached to container before
starting. We recommend that you obtain the Graymills lid
made specifically for this mixer system.
• Do not turn on until mixer is in fluid and you are ready to
begin mixing.
• Operator should wear eye protection and appropriate
personal protective clothing.
• Do not use mixer with liquids containing solids that could
damage propellers or motor.
INSTALLATION AND OPERATION
1. Remove mixer from carton. Verify that the 1.6A fast acting
fuses are installed in the power entry assembly (Figure 1,
item 2) on rear of mixer. Never bypass fuses or operate unit
without them installed.
2. If mixer has been supplied with lid (models MX13-A and
MX15-A), ensure that mixer is tightly secured to lid. For
standalone models (MX1-A-3G and MX1-A-5G), mount mixer
to a stable, level surface that is protected from liquid sprays
and other hazards. For Graymills lids, contact Customer
Service for part number 420-42011-81.
3. Ensure unit has adequate access to airflow for motor
cooling.
4. Immerse mixer propeller in liquid to be mixed, ensuring it is
submerged sufficiently to prevent splashing.
5. Connect supplied cord to a 115V, 60 Hz outlet and power
on mixer using the on/off switch on rear of unit.
SHUTDOWN AND STORAGE PROCEDURE
1. Turn off power and disconnect cord.
2. In hot environments, the electric motor can become warm to
the touch. Using caution, remove mixer from service.
3. Clean shaft and propellers by wiping with damp rag or
by placing mixer securely over a container full of water or
cleaning fluid. Dry, store.
4. To protect unit from damage, do not store mixer leaning on
shaft.
REPLACEMENT PARTS
1 Gear Motor with Fan 397-92709
2 1.6A Fast-Acting Fuses 780-92710
3 Lid, for 3 and 5 gallon container 420-42011-81
4 Propeller
525-41998-88
115V Power Cordset 777-08821
WARRANTY
Graymills Corporation warrants that the equipment manufactured
and delivered hereunder, when properly installed and maintained,
shall be free from defects in workmanship and will function as quoted
in the published specification. Graymills does not warrant process
performance nor does Graymills assume liability for equipment
selection, adaption or installation.
This warranty does not apply to damages or defects caused by
operator carelessness, misuse, abuse, improper application, or
abnormal use; the use of add-on parts or equipment which damages
or impairs the proper function of the unit and modifications made by
Buyer.
Graymills’
obligation under this Warranty shall be limited to:
• Replacing or repairing (at Graymills’ sole discretion) any non-
conforming or defective parts manufactured by Graymills within
one year from the date of shipment to customer.
• Replacing or repairing (at Graymills’ sole discretion) thermoplastic
parts cleaner tanks or lids that have cracked or split under normal
use within five (5) years from date of shipment.
• Replacing or repairing components supplied but not manufactured
by Graymills to the extent of the warranty given by the original
manufacturer.
Buyer must give Graymills prompt notice of any defect or failure and
satisfactory proof thereof.
This warranty does not apply to expendable parts which need periodic
replacement due to normal wear.
This warranty does not apply to rusting of mild steel components or
tanks in product used with aqueous (water based) fluids.
A new warranty period shall not be established for repaired or
replaced materials or products. Such items shall remain under warranty
for only the remainder of the warranty period of the original materials
or products.
If you believe you have a warranty claim, contact Graymills at
773-248-6825 for a Return Merchandise Authorization number. Any
returned material must have its RMA number on the outside of the
package and be shipped prepaid or the shipment will be refused.
Graymills will promptly examine the material and determine if it is
defective and within the warranty period.
THE fOREGOinG WARRAnTiEs ARE in liEU Of All OTHER
WARRAnTiEs WHETHER ORAl, WRiTTEn, ExPREssED, iMPliED OR
sTATUTORy. iMPliED WARRAnTiEs Of fiTnEss fOR A PARTiCUlAR
PURPOsE AnD MERCHAnTAbiliTy sHAll nOT APPly. Graymills’
warranty obligations and Buyer’s remedies thereunder (except as
to title) are solely and exclusively as stated herein. In no case will
Graymills be liable for consequential damages, loss of production or
any other loss incurred because of interruption of service.
795-92802 03-13 Electric Mixer OMI
© 2013 Graymills Corporation
The information contained in this manual is intended to be accurate. However, the manufacturer retains the right to make changes in design which may not be included herein.
3705 N Lincoln Avenue Chicago, IL 60613 773-248-6825
[email protected] www.graymills.com
Figure 1