Kramer Electronics 105VB - Manual (Page 6)

Overview
3
3
3 Overview
The following sections describe the:
• 103AV, 1:3 Audio-Stereo / Video DA, which accepts one audio input and
one video input, provides correct buffering and isolation, and distributes
these signals to three identical audio and video outputs (see section 4)
• 104M, 1:4 Microphone Amplifier, which accepts a single Mic input that is
amplified and distributes it to four identical outputs (see section 5)
• 105A, 1:5 Stereo Audio DA, which accepts one stereo audio input and
distributes it to five identical outputs (see section 6)
• 105S, 1:5 High Resolution s-Video DA, which accepts one s-Video signal
and distributes it to five identical outputs (see section 7)
• 105V, 1:5 High Resolution Video DA, which accepts one video input and
distributes it to five identical outputs (see section 8)
• 105VB, 1:5 High Resolution Video DA, which accepts one video input
and distributes it to five identical outputs (see section 9)
3.1 Recommendations for Achieving the Best Performance
To achieve the best performance:
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
• Avoid interference from neighboring electrical appliances and position your
Kramer machines away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit 1 .
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 For example: model number AD2512C, part number 2535-000251