Kramer Electronics VM-2Hxl - Manual (Page 8)

VM-2Hxl - Overview 5
Figure 1: VM-2Hxl 1:2 HDMI Distributor
# Feature Function
1 HDMI IN Connects to the HDMI source
2 HDMI OUT 1 Connects to the HDMI acceptor 1
3 HDMI OUT 2 Connects to the HDMI acceptor 2
4 5V DC +5V DC connector for powering the unit
5 EDID SETUP Button Press for more than 3 seconds to acquire the EDID information
from the display
6 INPUT LED Flashes when the stored EDID does not match the display
device EDID; illuminates when the EDID corresponds to the
display device and that HDMI source is active
7 OUT 1 LED Flashes during the EDID setup; illuminates when output 1 is
connected
8 OUT 2 LED Flashes during the EDID setup; illuminates when output 2 is
connected
9 ON LED Illuminates when receiving power