Kramer Electronics VP-210K - Manual (Page 5)

Overview
3
3 Overview
The high-performance VP-210K is a line amplifier for UXGA 1 computer
graphics signals that provides controls to compensate for signal losses
inherent in long cable runs.
In particular, the
VP-210K UXGA Line Amplifier features:
Video bandwidth of 350MHz, ensuring that it remains transparent
for all resolutions
HDTV compatibility
Separate controls for output level and cable equalization, and
independent input signal termination for red, green and blue
A looping input
KR-ISP™ advanced sync processing that ensures compatibility
with a wide range of computers (even if the sync level is too low)
by restoring the sync signal waveform
To achieve the best performance:
Use only good quality connection cables 2 to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VP-210K away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
3
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 XGA, as used in this manual, means any RGBHV signal on a 15-pin HD connector having a resolution from VGA up to
UXGA
2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
3 For example, part number 2535-052002