Kramer Electronics VP-4xl - Manual (Page 4)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VGA/UXGA Distributor
2
Includes front panel EQ. control
Features two switches on the underside for ID Bit control
Has video bandwidth that exceeds 375MHz, making them suitable for the
highest resolution graphics signal distribution
Accepts one input, provides necessary buffering and isolation, and
distributes the signal to its identical outputs
Is mains fed and is housed in a half 19" enclosure
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise levels
(often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer VP-3xl, VP-4xl,
and/or VP-5xl away from moisture, excessive sunlight and dust
4 Your VGA/UXGA Distributor
This section describes each VGA/UXGA Distributor, as follows:
VP-3xl (see section 4.1)
VP-4xl (see section 4.2)
VP-5xl (see section 4.3)
The underside of the VGA/UXGA Distributor is identical on the VP-3xl,
VP-4xl, and VP-5xl (see section 4.4).