Kramer Electronics VP-8K - Manual (Page 7)

Connecting the VP-8K 1:8 VGA / UXGA Distributor
5
5 Connecting the VP-8K 1:8 VGA / UXGA Distributor
To connect the VP-8K, as the example in Figure 2 illustrates:
1. Connect a computer graphics source to the VGA / UXGA INPUT 15-pin HD
(F) connector.
2. Connect the VGA / UXGA OUTPUT 15-pin HD (F) connectors to up to 1
3. Connect the 5V DC power adapter to the power socket and connect the adapter
to the mains electricity (not illustrated in
eight acceptors (for example, displays).
Figure 2).
4. Set the SYNC 75Ω / Hi-Z (TTL) switch to the Hi-Z (TTL) position.
Figure 2: Connecting the VP-8K 1:8 VGA / UXGA Distributor
1 When not all outputs are required, connect only the output(s) that is required and leave the other outputs unconnected